Cable Mat Kit 200W per m²

From:- £177.56

  • * Mat Size. :-
    * Thermostat:-
    * Primer. :-
Description & SpecificationThermostat ChoiceInstalation & ConstructionInstalation Video

Electric Underfloor Heating Mat Kit 200W per m² 5m² to 18m²

Everything you need in one box.

  • 3mm twin element stitched to a self adhesive mesh matting.
  • Acrylic floor primer with roller. Upgradable to Thermal Primer.
  • Choice of Digital fully programmable thermostat. with remote floor sensor.
  • Full installation instructions.
  • 200W/m²
  • Lifetime guarantee.

SIZE NOTE!

When working out Cable Mat size, normal coverage is between 80% and 90%. So a 10m² room would only require a 9.0m² mat (Max) or an 8.0m² mat if the room was a complex shape.

If you are unsure call one of our team who will advise you. Call us free on 0800 881 8097.

 IMAGECODEDESCRIPTION
Electric Underfloor Heating Thermostat
FH300 Thermostat
FH300The FH300, our standard thermostat, is a fully programmable thermostat with very easy to use  24hr 7-day timer. This thermostat for the electric underfloor heating cable kit has a 16Amp rating and is supplied with a floor sensor.
FH01 Thermostat
FH01 Thermostat
FH-01The FH-01 Thermostat is one of the most energy efficient on the market, it can handle a 16 Amp load, yet is incredibly easy to use with full 7-day 24 hour timer – we believe that this is the best & most reliable floor heating thermostat currently available on the market.
Comes complete with floor sensor probe.
Neo Stat E1 Thermostat
Neo Stat E1 Thermostat
neoStat-eThe neoStat-e has been made specifically for electric heating and is especially suited to electric underfloor heating cable kit and can be run as a stand alone system. The neoStat-E is rated to 16Amps and is supplied with a 3 meter floor sensor.The neoStat-e is very simple to use straight from the box and even easier when used in conjunction with a neoHub, enabling you to control your heating system remotely via a pc or smartphone.

 

Heating cables
Heating Cables on Insulated floor
Single Cable Mat installation
Single Cable Mat installation

 

Example shown is a 5m² (10m total length of mat) divided into 5 runs each of 2m long with a 50mm gap between each run of matting to maintain minimum cable spacing.

Cable Mat in a Kitchen Installation

Example shown is a 2.5m² cable mat (5m total length of mat) 3 full widths runs each laid to maintain a 50mm gap between cable loops. Two of the mat runs are approximately 2.2m long and the third run is 0.9m. The remainder of the cable is removed from the mesh matting, laid loose and fixed in place with self-adhesive cloth tape (duct tape). When run loose, the cable should be spaced similarly to when it is attached to the matting. Cables should be spaced no closer than 50mm

Bathroom installation

Example shown is a 2.5m² cable mat (5m total length of mat) 2 full width runs in front of the bath, each laid to maintain a 50mm gap between cable loops. Areas where a full width of mat cannot be laid, the cable is removed from the mesh matting, laid loose and fixed in place with a self adhesive cloth tape (duct tape). When run loose, the cable should be spaced similarly to when it is attached to the matting. Cables should be spaced no closer than 50 mm. Matting can also be laid 90° to main runs of matting.

Typical installation in a Victorian Conservatory

Example shown is a 9m² cable mat
(18m total length of mat) 6 full width runs of mat, each laid to maintain a 50mm gap between cable loops. The angled sides of the room create irregular areas which can be filled by removing the cable from the mesh matting, laid loose and fixed in place with self-adhesive cloth tape (duct tape). When run loose, the cable should be spaced, similarly to when it is attached to the matting. Cables should be spaced no closer than 50mm.

2 mat installation

Example shown is a 13m² cable mat
(14m+12m total lengths of mat) 8 full width runs of mat, each laid to maintain a 50mm gap between cable loops. As the thermostat is located at one end of the room, the matting has been laid so that the cold tails from each mat can be connected directly into the thermostat without the need to extend the cold tail.