In Screed Cable 2 to 5.3sqm

From:- £151.78

The system is a primary heat source & can be used under almost any floor covering.

The output is varied by the cable spacing & usually ranges from 120-150w per sqm in a new build or extension, up to 200w per sqm in a conservatory, or where an ‘off-peak’ solution is required.

  • * Cable Size. :-
    * Thermostat:-
Further InformationAdvantagesThermostat Options

This cable is also ideal for use directly below thick stone & flagstone type flooring.

In-screed cables are a low cost solution & are designed to be used where regular constant heat is required. Where irregular heating is needed (e.g. conservatory for ad-hoc use) we recommend the under-tile system with insulation boards (or an under wood/laminate carbon film system)

  • High quality cable design.
  • Robust cable for Construction sites.
  • Low cost.
  • Ideal for permanent heating of screed floors.
  • Fixed direct to steel reinforcing or to your floor Insulation.
  • Also suitable for de-icing driveways.
  • Switched Contactor/Relay available on request, when covering large areas that require above 16amp.
  • Call 0800 881 8097 for advice.
Electric Underfloor Heating Thermostat
FH300 Thermostat
FH300The FH300, our standard thermostat, is a fully programmable thermostat with very easy to use  24hr 7-day timer. This thermostat for the electric underfloor heating cable kit has a 16Amp rating and is supplied with a floor sensor.
FH01 Thermostat
FH01 Thermostat
FH-01The FH-01 Thermostat is one of the most energy efficient on the market, it can handle a 16 Amp load, yet is incredibly easy to use with full 7-day 24 hour timer - we believe that this is the best & most reliable floor heating thermostat currently available on the market. Comes complete with floor sensor probe.
Neo Stat E1 Thermostat
Neo Stat E1 Thermostat
neoStat-eThe neoStat-e has been made specifically for electric heating and is especially suited to electric underfloor heating cable kit and can be run as a stand alone system. The neoStat-E is rated to 16Amps and is supplied with a 3 meter floor sensor.The neoStat-e is very simple to use straight from the box and even easier when used in conjunction with a neoHub, enabling you to control your heating system remotely via a pc or smartphone.